1. <button id="olqpw"></button>

      • Guide Rails Temperature Transmitter Module
      • Guide Rails Temperature Transmitter Module
      • Guide Rails Temperature Transmitter Module
      • Guide Rails Temperature Transmitter Module
      • Guide Rails Temperature Transmitter Module

      TYPE:JC-D5138

      NAME:JC-D5138 Guide Rails Temperature Transmitter Module

      Guide Rails Temperature Transmitter Module?
      Use with?on-site?thermal?resistance or?thermocouple,they?are installed in the DIN guide rails of the junction box or nearby?controller.?The thickness of? module is only 12.5mm, could meet?the intensive installation? situation and allow the?centralized?access of all? connected??measuring point. No need individual power supply while connecting with 2-wire loop directly.

      Guide Rails Temperature Transmitter Module Features:

      Guide Rails Temperature Transmitter Module
      Use with?on-site?thermal?resistance or?thermocouple,they?are installed in the DIN guide rails of the junction box or nearby?controller.?The thickness of? module is only 12.5mm, could meet?the intensive installation? situation and allow the?centralized?access of all? connected??measuring point. No need individual power supply while connecting with 2-wire loop directly.

      Model Name JC-D5138 Guide Rails Temperature Transmitter Module
      Input Input signal Thermal resistance:Pt100,Cu50,Pt1000…etc total 11 types
      Thermocouple K,E,S,B,R,J,T,N…etc total 10types
      Resistance value 0…..2000Ω
      Mv:-75…75mV
      Measuring rage Thermal resistance 20oC?/ Thermocouple 50oC
      Sensor Connection 2-wire,3-wire,4-wire
      Cold end compensation interior /? fixation
      Cold end compensation accuracy ±1oC?/error free
      Cold end compensation range -40…85oC/unlimited
      Max line resistance permitted 50Ω/wire
      Output ?digital signal output HART protocol
      Analog signal output 4~20mA / 20 ~ 4mA
      signal transmission characteristic ?linear with temperature output
      Range overflow 3.8mA…20.5mA(linear)
      Sensor Fault Alarm ≤3.6mA or≥?21.5mA
      Limited-current ≤25mA
      Load resistance RL≤(Ue-9V)/0.025A(current output)
      Electric isolation 1500V AC(input/output)
      power supply Power supply Loop powered
      Voltage range 9….30V DC
      Reverse Current Protection Yes
      Voltage drop 9V
      EMC electrical fast transient / burst immunity test 2 class
      RFEMS >10V/m(80MHz…1000MHz)
      Parameter Installation method DIN Guide Rails
      Configuration mode DIP switch+ PC configurable+ HART communicator
      conversion accuracy 0.2oC/0.2%
      Temperature drift 0.008% FS/1oC
      Response time 1s
      Starting time 4s
      Insulation resistance ≥100MΩ
      Operating temperature -40…85oC
      Relative humidity ≤95%RH
      Enclosure protection class IP00/IP67
      ?Outline Dimension 12.5x99x115mm
      Hole pitch of Instllament 35mm Guide Rails

      Use with?on-site?thermal?resistance or?thermocouple,they?are installed in the DIN guide rails of the junction box or nearby?controller.?The thickness of? module is only 12.5mm, could meet?the intensive installation? situation and allow the?centralized?access of all? connected??measuring point. No need individual power supply while connecting with 2-wire loop directly.
      More complete HD video from YouTube:?click here

      Leave a Reply

      Your email address will not be published. Required fields are marked *

      2019免费v片在线观看